 | | | Base Station or Portable Antenna | Model: FAA 5526 |  The "FANLITE" antenna is a lightweight transportable HF wire antenna intended primarily for omni-directional sky wave communications to a range of up to 2000 miles. Short-range communication is achieved using a Near Vertical Incidence Sky wave (NVIS) configuration. The antenna is rated for 1KW continuous operation, with a VSWR not exceeding 2.2:1 from 2 to 30 MHz. | | Return to Top | Download brochure |
| Folded Broadband Dipole Antenna | Model: FAA 5501, FAA5529, FAA5527, FAA5528, FAD5532 |  The FAA 5501 is a high efficiency HF folded dipole antenna covering 1.8-30 MHz with a power rating of 1 KW Voice or 250 watts in Data or "continuous duty." Compact, with a minimum horizontal tower spacing of only 30 meters the antenna has excellent overall radiation efficiency. Construction is of stainless steel wire elements with die cast aluminum component housings and UV resistant fiberglass spacer rods. Lightweight but extremely robust and with a low total mass and low wind loading. Can be installed as "flat top" broadband dipole, a "sloper" or as an inverted V. | | FAA5501, 1.8 to 30 MHz | 90 ft, Copperweld, 500 Watts PEP/AVG | | FAA5529, 1.8 to 30 MHz | 90 ft, Stainless Steel, 500 Watts PEP/AVG | | FAA5527, 4 to 30 MHz | 65 ft, Copperweld, 500 Watts PEP/AVG | | FAA5528, 4 to 30 MHz | 65 ft, Stainless Steel, 500 Watts PEP/AVG | | FAD5532 | Folded Dipole Mounting Kit (FDMK) | | Return to Top | Download Brochure |
| Long-Wire Antenna | Model: TAA6030 |  The long-wire antenna requires less space than any dipole antenna, it is very simple to install and can be installed horizontally, in a slope, or as an inverted "L" (shown). Requires antenna tuner and good grounding for efficient operation. | | Return to Top | |
| HF - Mobile Whip Antenna | Model: TAA1000 (2.4m) or FAD1400 (3.4m) |  The mobile whip antennas come in two lengths, 2.4 meters (96 inches) stainless steel or 3.4 meters (3 ea. 48.4 inch fiberglass sections). The antenna bases are designed for easy installation on any vehicle. An antenna tuner must be used for operation in the HF frequency range of 1.6 to 30 MHz. | | Return to Top | Download FAD1400 & TAA 1000 brochure |
| Broadband Vertical Antenna | Model: FAA5522 |  The FAA5522 is a broadband HF whip antenna intended for use with Automatic Link Establishment (ALE) capable equipment for HF communications. No external tuning is necessary for operation over the 2 to 30 MHz HF bands. | - Minimal Maintenance requirements
- High Reliability
- Broadband
- No tuning devices, no radials required
- RF power 1 kilowatt average
| - Rugged fiberglass element and steel mounting components for harsh environments. Wall mounting brackets or mast not included.
- Can be mounted on a mast/pipe, tower, side of building or any other structure with proper user supplied mounting brackets.
| Return to Top | Download FAA5522 Antenna Brochure |
| Base or Marine Antenna | Model: MB-6886-86 |  The MB-6886-86 was originally designed for marine usage. It has been found to be an excellent choice for extensive use as a base station antenna The antenna is useable with Automatic Link Establishment (ALE) capable equipment for HF communications. Capable of operation over the1.8 to 30 MHz HF bands. Rated at 500 watts of RF Power. Capable of being taken apart for transporting in two sections when assembled the overall length is 35 foot total. | - Minimal Maintenance requirements
- High Reliability
- Broadband
- No radials required
- RF power 500 watt average
| - Rugged fiberglass element and stainless steel mounting components for harsh environments.
- Can be mounted on steel deck plate, building or a other structure with proper user supplied mounting brackets.
| Return to Top | Download Antenna Brochure
|
| HF - SSB Wide-band Mobile and Automatic System (WIMA) | Model: FAD1410 |  The MICOM WIMA is a Wide-band, Mobile, and Automatic Antenna System. The system consists of a fast tuning, microprocessor controlled antenna tuner and a 6 ft (2.13 meter) fiberglass whip antenna. The tuner is rated at 125 watts for voice and limited data operation. It covers the entire HF frequency range of 1.6 to 30 MHz with a nominal VSWR of 1.5:1. Also available for increasing transmission range is a 12 ft 3 section fiberglass whip or a Near Vertical Incidence Sky wave (NVIS) kit. | - 125 watts PEP
- Single RF cable for both RF and control
- Fully waterproof
| - Large memory capacity for fast tuning,
- Compatible with all Micom-Radios
| | Return to Top | Download brochure |
| Magnetic Mount System (MMS) | |  The Magnetic Mount System (MMS) provides a mounting base for several antenna tuner types with a gimbal type of mount to position the antenna. The mount provides a connection between the tuner high voltage RF output stud and the antenna mounting threads. The "grounding " connections on the mount also facilitate a "quick and easy" bonding and grounding to the site ground or counterpoise radials. The MMS is the answer to easy, reliable antenna and antenna tuner mounting for mobile or field environments. | - Instant field deployment without tools
- Mounts on any magnetic metal surface
- Powerful magnetic mounting feet
| - Assortment of antenna mounting threads
- 9 foot collapsible whip stores under deck plate
- Aluminum, stainless steel, and chromed brass construction
| | Return to Top | Download brochure |
| Voice duty cycle Antenna Tuner | Model: F2265 |  The antenna tuner is a weatherproof, rugged, microprocessor controlled, automatic unit designed for voice operation. A single RF cable connects any Micom-2 or 3 series radio to the tuner providing both RF power and tuner control. The fast tuning design is ideal for Automatic Link Establishment (ALE) operation. Tuner also available in Olive Drab color as Model FLN2537. The Antenna Tuners meet MIL STD 810D. | - 125 watts PEP
- 1.6-30 MHz operation
- Operates at peak efficiency
- Flexible mounting options
| - Single RF cable for both RF and control
- Large memory capacity with fast tuning
- Lightweight, compact and weather resistant
- Low level tune power
| | Return to Top | Download Brochure |
| Heavy Duty Antenna Tuner. | Model: FLN2818 |  The FLN2818 antenna tuner is a heavy duty version of the F2265. It is a weatherproof, ruggedized, microprocessor controlled, automatic unit designed for data and voice operation. A single RF cable connects any Micom-2 or 3 series radio to the tuner providing both RF power and tuner control. The automatic antenna tuner is a tuning unit designed for Automatic Link Establishment (ALE) operation. The Antenna Tuner meets MIL STD 810D. | - 125 watts continuous
- 1.6-30 MHz operation
- Operates at peak efficiency
- Single RF cable for both RF and control
| - Large memory capacity with fast tuning
- Lightweight, compact and weather resistant
- Flexible mounting options
- Low level tune power
| | Return to Top | Download Brochure |
| 1 Kw. Antenna Tuner. | Model: FTN6074 |  The FTN6074 1 Kilowatt Antenna Tuner is a fast tuning automatic antenna tuner that matches the output of the Micom-RM-1200 I Kilowatt HF radio System to a wide variety of whip an long-wire antenna's. The tuner matches the antenna impedance to the output impedance of the radio system. The fast tuning design is intended to support both conventional and Automatic Link Establishment (ALE) operation. The Antenna Tuner meets MIL STD 810F. | - Tuning data stored in memory
- 1.6-30 MHz operation
- Operates at reduced tuning times
- Weather resistant aluminum case
| - Suitable for shipboard applications
- Suitable for conventional communications
- Suitable for ALE communications
- Nominal VSWR of 1.5:1 at 1.6 to 30 MHz range
| | Return to Top |  Download Brochure |
| 500 Watt Antenna Tuner. | Model: FTN6073 | | The FTN6073 500 watt Antenna Tuner is a fast tuning automatic antenna tuner that matches the output of the Micom-RM-500 500 watt HF radio System to a wide variety of whip an long-wire antenna's. The tuner matches the antenna impedance to the output impedance of the radio system. The fast tuning design is intended to support both conventional and Automatic Link Establishment (ALE) operation. The Antenna Tuner meets MIL STD 810F. | - Tuning data stored in memory
- 1.6-30 MHz operation
- Operates at reduced tuning times
- Weather resistant aluminum case
| - Suitable for shipboard applications
- Suitable for conventional communications
- Suitable for ALE communications
- Nominal VSWR of 1.5:1 at 1.6 to 30 MHz range
| | Return to Top | Download Brochure |
Updated:07 August 2008 |
|
